Help:Convert

Template:Wikipedia how-to Template {{convert}} is used to convert a value from one unit of measurement to another. This page provides an overview of the options available when using the template. See the documentation at Template:Convert for further details.

• Help:Convert units • Simplified list of some commonly used units
• Help:Convert messages • Error and warning messages

Asking questions

• Template talk:Convert • Questions on using the convert template, or discussion of any problems encountered, or proposals to add units or change convert
• Wikipedia:Help desk • General questions
• Module talk:Convert • Discussion concerning the convert modules (however, discussions relating to units should occur at Template talk:Convert)

Units

• Help:Convert units • Overview and simplified list of some commonly used units
• Module:Convert/documentation/conversion data • Full list of units

Quick start

By default, the name of the input unit is shown, while the output is abbreviated using the unit's symbol. If wanted, names or symbols can be used, and the output precision can be specified.

• {{convert|123.4|ft|m}} → 123.4 feet (37.6 m)
• {{convert|123.4|ft|m|abbr=on}} → 123.4 ft (37.6 m)
• {{convert|123.4|ft|m|abbr=off}} → 123.4 feet (37.6 metres)
• {{convert|123.4|ft|m|abbr=off|sp=us}} → 123.4 feet (37.6 meters)
• {{convert|123.4|ft|m|0}} → 123.4 feet (38 m)
• {{convert|123.4|ft|m|3}} → 123.4 feet (37.612 m)

Feet and inches can be converted, optionally with fractions.

• {{convert|12.34|m|ft}} → 12.34 metres (40.5 ft)
• {{convert|12.34|m|ftin}} → 12.34 metres (40 ft 6 in)
• {{convert|12.34|m|ftin|frac=4}} → 12.34 metres (40 ft 5+3⁄4 in)
• {{convert|40|ft|6|in|m}} → 40 feet 6 inches (12.34 m)
• {{convert|5+3/4|in|mm}} → 5+3⁄4 inches (150 mm)
• {{convert|5+3/4|in|mm|0}} → 5+3⁄4 inches (146 mm)

To avoid overlinking, units are not normally linked, but they can be when needed.

• {{convert|12300|m2|rood|abbr=off|lk=out}} → 12,300 square metres (12.2 roods)
• {{convert|12.2|rood|m2|abbr=off|lk=in}} → 12.2 roods (12,300 square metres)
• {{convert|12300|m2|rood|abbr=off|lk=on}} → 12,300 square metres (12.2 roods)

A convert can be used in an adjectival phrase, and user-specified text can be inserted (e.g. -tall, -long, -high, -wide).

• {{convert|1500|ft|m|adj=on}} → 1,500-foot (460 m)
• {{convert|1500|ft|m|adj=mid|-long}} → 1,500-foot-long (460 m)

If no output unit is specified, a default is used.

• {{convert|123.4|ft}} → 123.4 feet (37.6 m)
• {{convert|123.4|ft|abbr=on}} → 123.4 ft (37.6 m)
• {{convert|1500|ft||adj=mid|-long}} → 1,500-foot-long (460 m)

The last example used || to explicitly show that the output unit has been omitted. If that is not done, the result is an error, and holding the mouse over the error message shows that "-long" is misinterpreted as the output unit.

• {{convert|1500|ft|adj=mid|-long}} → 1,500-foot ()

The input and output can be swapped ("flipped").

• {{convert|12300|m2|rood|abbr=off|order=flip}} → 12.2 roods (12,300 square metres)
  

In a flipped conversion, an option such as |lk=out means "link the right-hand side".

• {{convert|12300|m2|rood|abbr=off|lk=out|order=flip}} → 12.2 roods (12,300 square metres)
• {{convert|12300|m2|rood|abbr=off|lk=in|order=flip}} → 12.2 roods (12,300 square metres)
• {{convert|12300|m2|rood|abbr=off|lk=on|order=flip}} → 12.2 roods (12,300 square metres)

The input value can be written out in words.

• {{convert|5|mi|km|spell=in|0}} → five miles (8 km)
• {{convert|5|mi|km|spell=In|0}} → Five miles (8 km)

Ranges of values are supported.

• {{convert|3|-|6|ft}} → 3–6 feet (0.91–1.83 m)
• {{convert|3|to|6|ft|abbr=off|sp=us}} → 3 to 6 feet (0.91 to 1.83 meters)

A range can use more than two values.

• {{convert|100|x|120|x|210|mm|in}} → 100 by 120 by 210 millimetres (3.9 in × 4.7 in × 8.3 in)
• {{convert|100|xx|120|xx|210|mm|in}} → 100 × 120 × 210 millimetres (3.9 × 4.7 × 8.3 in)
• {{convert|100|x|120|x|210|mm|in|abbr=on}} → 100 mm × 120 mm × 210 mm (3.9 in × 4.7 in × 8.3 in)
• {{convert|100|by|120|by|210|mm|in}} → 100 by 120 by 210 millimetres (3.9 by 4.7 by 8.3 in)

Some input units consist of multiple components.

• {{convert|5|ft|8|in}} → 5 feet 8 inches (1.73 m)
• {{convert|11|st|3|lb|kg}} → 11 stone 3 pounds (71 kg)

The output can show several different units.

• {{convert|123|nmi|km mi}} → 123 nautical miles (228 km; 142 mi)
• {{convert|123|hPa|psi inHg|abbr=on|lk=on}} → 123 hPa (1.78 psi; 3.6 inHg)

When a unit such as short ton contains a space, use + to separate units.

• {{convert|1,234|metric ton|short ton+long ton}} → 1,234 metric tons (1,360 short tons; 1,215 long tons)

Some outputs give a measurement in multiple units.

• {{convert|123.4|m|ydftin}} → 123.4 metres (134 yd 2 ft 10 in)
• {{convert|123.4|kg|stlb}} → 123.4 kilograms (19 st 6 lb)

Only output multiple codes such as ydftin can be used:

• {{convert|123.4|m|yd ft in}} → 123.4 metres (135.0 yd; 405 ft; 4,860 in)
• {{convert|123.4|m|yardfootinch}} → 123.4 m Error in convert: Unit name "yardfootinch" is not known

Rounding

By default, the output value is rounded to adjust its precision to match that of the input. An input such as 1234 is interpreted as 1234 ± 0.5, while 1200 is interpreted as 1200 ± 50, and the output value is displayed accordingly, taking into account the scale factor used in the conversion.

If the default is not wanted, the precision of output values can be specified using:

• |N (where N is a number) displays N digits after the decimal mark (round output to N decimal places).
• |-N (where -N is a negative number) replaces N digits before the decimal mark with zero (round output to nearest 10^N).
• |sigfig=N (where N is a positive number) to specify the number of significant digits (round output to N significant figures).
• |round=5 to round the output to the nearest multiple of 5. The round value can be 0.5, 5, 10, 25 or 50.

Examples:

• {{convert|1234|ft|m}} → 1,234 feet (376 m)
• {{convert|1234|ft|m|2}} → 1,234 feet (376.12 m)
• {{convert|1234|ft|m|-1}} → 1,234 feet (380 m)
• {{convert|1234|ft|m|round=5}} → 1,234 feet (375 m)
• {{convert|1234|ft|m|round=10}} → 1,234 feet (380 m)
• {{convert|1234|ft|m|round=25}} → 1,234 feet (375 m)
• {{convert|1234|ft|m|round=50}} → 1,234 feet (400 m)
• {{convert|1234|ft|m|sigfig=2}} → 1,234 feet (380 m)
• {{convert|1234|ft|m|sigfig=4}} → 1,234 feet (376.1 m)
• {{convert|1230|ft|m}} → 1,230 feet (370 m)
• {{convert|1230|ft|m|0}} → 1,230 feet (375 m)
• {{convert|1230|ft|m|1}} → 1,230 feet (374.9 m)
• {{convert|5670|sqft}} → 5,670 square feet (527 m²)
• {{convert|5670|sqft|-2}} → 5,670 square feet (500 m²)
• {{convert|7|x|8|x|12|ft|abbr=on|round=0.5}} → 7 ft × 8 ft × 12 ft (2 m × 2.5 m × 3.5 m)

An input value such as 5000 is assumed to have one significant figure, while 5001 has four. If wanted, "5000." can be used to specify an input number that has four significant figures.

• {{convert|5000|m}} → 5,000 metres (16,000 ft)
• {{convert|5000.|m}} → 5,000 metres (16,404 ft)

Spell

Use |sp=us to specify that unit names should be displayed with US spelling:

• {{convert|6|km}} → 6 kilometres (3.7 mi)
• {{convert|6|km|sp=us}} → 6 kilometers (3.7 mi)

Using |spell=us also works:

• {{convert|6|km|spell=us}} → 6 kilometers (3.7 mi)

Use |spell=in to specify that the input value should be spelled in words, or |spell=In (uppercase "I") to start with an uppercase letter:

• {{convert|5|mi|km|spell=in}} → five miles (8.0 km)
• {{convert|5|mi|km|spell=in|abbr=off|0}} → five miles (8 kilometres)
• {{convert|5|mi|km|spell=In|0}} → Five miles (8 km)
• {{convert|5|mi|km|spell=In|abbr=off|0}} → Five miles (8 kilometres)
• {{convert|2+1/4|mi|km|abbr=off|0|spell=In}} → Two and a quarter miles (4 kilometres)
• {{convert|2+1/4|mi|km|abbr=off|0|spell=In|sp=us}} → Two and a fourth miles (4 kilometers)

The input and output can be "flipped", as shown in these examples. The resulting first number is spelled:

• {{convert|5|mi|0|order=flip|spell=in}} → eight kilometres (5 mi)
• {{convert|5|mi|0|order=flip|spell=In|abbr=off}} → Eight kilometres (5 miles)

Both input and output values can be spelled:

• {{convert|5|mi|m|-2|spell=on|sp=us|abbr=off}} → five miles (eight thousand meters)
• {{convert|5|mi|m|-2|spell=On|sp=us|abbr=off}} → Five miles (eight thousand meters)

Thousands separator

Commas in input numbers are ignored but spaces are not accepted: 1,000 is one thousand but 1 000 is an error.

In the output, the default thousands separator is a comma:

• {{convert|1234567|m|ft}} → 1,234,567 metres (4,050,417 ft)
• {{convert|1,234,567|m|ft}} → 1,234,567 metres (4,050,417 ft)

Set |comma=off to remove separators from the result:

• {{convert|1,234,567|m|ft|comma=off}} → 1234567 metres (4050417 ft)

Setting |comma=5 adds a separator only when the number of digits is 5 or more:

• {{convert|1234|m|ft}} → 1,234 metres (4,049 ft)
• {{convert|1234|m|ft|comma=5}} → 1234 metres (4049 ft)
• {{convert|12345|m|ft|comma=5}} → 12,345 metres (40,502 ft)

Set |comma=gaps to use a small space for thousands grouping. If the resulting number is copied, only the digits are copied (the gaps are omitted).

• {{convert|1234567|m|ft}} → 1,234,567 metres (4,050,417 ft)
• {{convert|1234567|m|ft|comma=gaps}} → 1234567 metres (4050417 ft)

Gaps are inserted on both sides of the decimal mark. However, by default, no gap is inserted before a single digit. If a gap is always wanted, |comma=gaps3 can be used.

• {{convert|1234.98765|m|ft|comma=gaps}} → 1234.98765 metres (4051.7968 ft)
• {{convert|1234.98765|m|ft|comma=gaps3}} → 1234.98765 metres (4051.7968 ft)
• {{convert|1234.9876|m|ft|comma=gaps}} → 1234.9876 metres (4051.797 ft)
• {{convert|1234.9876|m|ft|comma=gaps3}} → 1234.9876 metres (4051.797 ft)
• {{convert|1.2349876|m|ft|comma=gaps}} → 1.2349876 metres (4.051797 ft)
• {{convert|1.2349876|m|ft|comma=gaps3}} → 1.2349876 metres (4.051797 ft)

Fractions

An input value can be specified as a fraction.

• {{convert|1/2|in|mm|1}} → 1⁄2 inch (12.7 mm)
• {{convert|1/2|in|mm|1|adj=on}} → 1⁄2-inch (12.7 mm)
• {{convert|2+1/2|in|mm|1}} → 2+1⁄2 inches (63.5 mm)
• {{convert|1|ft|10+5/8|in}} → 1 foot 10+5⁄8 inches (0.575 m)
• {{convert|-2-1/4|in|mm|1}} → −2+1⁄4 inches (−57.2 mm)
• {{convert|1/2|in|mm|1|spell=in}} → one-half inch (12.7 mm)

If two slashes are used, a horizontal fraction bar is used.

• {{convert|1//2|in|mm|1}} → 1/2 inch (12.7 mm)
• {{convert|2+1//2|in|mm|1}} → 2+1/2 inches (63.5 mm)

An output can be expressed with a fraction using |frac=N where N is the denominator. For example, |frac=8 rounds the output to the nearest eighth.

• {{convert|219|mm|in|abbr=on}} → 219 mm (8.6 in)
• {{convert|219|mm|in|abbr=on|frac=2}} → 219 mm (8+1⁄2 in)
• {{convert|219|mm|in|abbr=on|frac=4}} → 219 mm (8+1⁄2 in)
• {{convert|219|mm|in|abbr=on|frac=8}} → 219 mm (8+5⁄8 in)
• {{convert|222|mm|in|abbr=on|frac=8}} → 222 mm (8+3⁄4 in)

A fraction is applied to the output unit (if there is only one), or to non-SI units (if using a combination), except that if a precision is also specified, the fraction only applies to the hand unit.

• {{convert|18.45|in|m|frac=2}} → 18.45 inches (1⁄2 m)
• {{convert|18.45|in|ft in hand cm|frac=2}} → 18.45 inches (1+1⁄2 ft; 18+1⁄2 in; 4.2+1⁄2 hands; 46.9 cm)
• {{convert|18.45|in|ft in hand cm|frac=2|1}} → 18.45 inches (1.5 ft; 18.5 in; 4.2+1⁄2 hands; 46.9 cm)

If |frac=-N is used (negative N), a horizontal fraction bar is used for the output.

• {{convert|12.7|mm|frac=-2}} → 12.7 millimetres (1/2 in)
• {{convert|222|mm|in|abbr=on|frac=-8}} → 222 mm (8+3/4 in)

Joins

The |disp= ("display") option may be used to "join" the input and output, as shown in the following examples.

Convert	Output	Description
{{convert|2.4|m|ft}}	2.4 metres (7.9 ft)	default
{{convert|2.4|m|ft|disp=sqbr}}	2.4 metres [7.9 ft]	square brackets
{{convert|2.4|m|ft|disp=or}}	2.4 metres or 7.9 feet	or
{{convert|2.4|m|ft|disp=comma}}	2.4 metres, 7.9 ft	comma
{{convert|2.4|m|ft|disp=semicolon}}	2.4 metres; 7.9 ft	semicolon
{{convert|2.4|m|ft|disp=br}}	2.4 metres 7.9 feet	"<br />", line break
{{convert|2.4|m|ft|disp=br()}}	2.4 metres (7.9 feet)	line break and brackets

Ranges

A range of values can be specified, as shown in the following examples.

Separator	Convert	Result	Notes
-	{{convert|3|-|6|ft}}	3–6 feet (0.91–1.83 m)	Input can be hyphen (-) or en dash (–), output uses en dash
and	{{convert|3|and|6|ft}}	3 and 6 feet (0.91 and 1.83 m)
and(-)	{{convert|3|and(-)|6|ft}}	3 and 6 feet (0.91–1.83 m)	and on left; en dash on right
and(-)|order=flip	{{convert|3|and(-)|6|ft|order=flip}}	0.91 and 1.83 metres (3–6 ft)
or	{{convert|3|or|6|ft}}	3 or 6 feet (0.91 or 1.83 m)
to	{{convert|3|to|6|ft}}	3 to 6 feet (0.91 to 1.83 m)
to(-)	{{convert|3|to(-)|6|ft}}	3 to 6 feet (0.91–1.83 m)	to on left; en dash on right
to(-)|order=flip	{{convert|3|to(-)|6|ft|order=flip}}	0.91 to 1.83 metres (3–6 ft)
to about	{{convert|3|to about|6|ft}}	3 to about 6 feet (0.91 to about 1.83 m)
+/-	{{convert|3|+/-|6|ft}}	3 ± 6 feet (0.91 ± 1.83 m)
Template:Hidden sort key± ±	{{convert|3|±|6|ft}}	3 ± 6 feet (0.91 ± 1.83 m)
+	{{convert|3|+|6|ft}}	3 + 6 feet (0.91 + 1.83 m)
,	{{convert|3|,|6|ft}}	3, 6 feet (0.91, 1.83 m)
, and	{{convert|3|, and|6|ft}}	3, and 6 feet (0.91, and 1.83 m)
, or	{{convert|3|, or|6|ft}}	3, or 6 feet (0.91, or 1.83 m)
/	{{convert|83|/|63|F|disp=br()|abbr=values}}	83 / 63 (28 / 17)	Slash with thin spaces for a table of high/low temperatures.
by	{{convert|3|by|6|ft}}	3 by 6 feet (0.91 by 1.83 m)
by(x)	{{convert|3|by(x)|6|ft}}	3 by 6 feet (0.91 m × 1.83 m)	by on left; multiply (×) on right
by(x)|order=flip	{{convert|3|by(x)|6|ft|order=flip}}	0.91 by 1.83 metres (3 ft × 6 ft)
x	{{convert|3|x|6|ft}}	3 by 6 feet (0.91 m × 1.83 m)
x|abbr=on	{{convert|3|x|6|ft|abbr=on}}	3 ft × 6 ft (0.91 m × 1.83 m)	|abbr=on displays × instead of by
xx	{{convert|3|xx|6|ft|abbr=on}}	3 × 6 ft (0.91 × 1.83 m)	Caution, see MOS:UNITNAMES.

Ranges can use more than two values.

Convert	Output
{{convert|3|x|4|x|24|in}}	3 by 4 by 24 inches (76 mm × 102 mm × 610 mm)
{{convert|3|x|4|to|6+1/2|x|8+3/4|in}}	3 by 4 to 6+1⁄2 by 8+3⁄4 inches (76 mm × 102 mm to 165 mm × 222 mm)
{{convert|3|xx|4|to|6+1/2|xx|8+3/4|in}}	3 × 4 to 6+1⁄2 × 8+3⁄4 inches (76 × 102 to 165 × 222 mm)

Ranges can be specified in the first parameter although writing {{convert|3.2|-|7.5|ha}} would be clearer.

Convert	Output
{{convert|3.2-7.5|ha}}	3.2–7.5 hectares (7.9–18.5 acres)
{{convert|3x4x24|in}}	3 by 4 by 24 inches (76 mm × 102 mm × 610 mm)

Extra words

Some options provide text that is included in the output, as shown in the following examples.

Convert	Output	Description
{{convert|4|ft||adj=mid|-long}}	4-foot-long (1.2 m)	Adjectival with mid-text between input and output (sets |adj=on)
{{convert|40|acre||adj=pre|planted}}	40 planted acres (16 ha)	Text before the input unit
{{convert|4|m||disp=preunit|+ }}	4+ metres (13+ ft)	Same text before the input and output units
{{convert|4|m||disp=preunit|+ |or more }}	4+ metres (13 or more ft)	Different text before the input and output units
{{convert|20|impfloz||disp=x|, approximately }}	20 imperial fluid ounces, approximately 570 ml; 19 US fl oz	Text before the output (replaces the join)
{{convert|100|m||disp=x|/day (|/day)}}	100 metres/day (330 ft/day)	Text before and after the output (replaces the join)

In each of the above examples, "||" provides an empty output unit which causes the default output to be used. An output unit, possibly empty, must be specified to avoid the template interpreting the extra text as the output unit. For example, using {{convert|4|ft|adj=mid|-long}} has the same effect as using {{convert|4|ft|-long|adj=mid}}, namely that an error would occur because "-long" would be used as the output unit. The following illustrates the error (hover the mouse over the error text to see that the problem is due to "-long" ) and how it may be avoided.

• {{convert|4|ft|adj=mid|-long}} → 4-foot ()
• {{convert|4|ft||adj=mid|-long}} → 4-foot-long (1.2 m)
• {{convert|4|ft| |adj=mid|-long}} → 4-foot-long (1.2 m)
• {{convert|4|ft|m|adj=mid|-long}} → 4-foot-long (1.2 m)

Displaying "a" or "an" instead of "one"

{{one2a}} may be used with {{convert}}

• {{convert|1|ft|spell=in}} → one foot (0.30 m)
• {{one2a|{{convert|1|ft|spell=in}}}} → Template:One2a
• {{one2a|{{convert|1|in|mm|1|spell=in}}}} → Template:One2a

Displaying parts of a conversion

The following examples show how to display only a part of the result.

abbr=on (abbreviate) displays unit symbols, not names

Convert	Returns	Components
{{convert|2|cuyd|m3}}	2 cubic yards (1.5 m3)	all (default conversion)
{{convert|2|cuyd|m3Template:Bg}}	2 (1.5)	numbers only
{{convert|2|cuyd|m3Template:Bg}}	cubic yards	input unit
{{convert|2|cuyd|m3Template:Bg}}	cubic-yard	input unit, adjectival (hyphenated)
{{convert|2|cuyd|m3Template:Bg}}	cu yd	input unit, adjectival (but abbr so not hyphenated)
{{convert|2|cuydTemplate:Bg}}	2.0 cu yd	input unit abbr (workaround)
{{convert|2|cuyd|m3Template:Bg}}	1.5 m3	output value, symbols
{{convert|2|cuyd|m3Template:Bg}}	1.5 cubic metres	output value, names
{{convert|2|cuyd|m3Template:Bg}}	1.5-cubic-metre	output, adjective
{{convert|2|cuyd|m3Template:Bg}}	1.5	output number
{{convert|2|cuyd|m3Template:Bg}}	m3	output unit (abbr by default)
{{convert|2|cuyd|m3Template:Bg}}	cubic metres	output unit (name)
{{convert|2|cuyd|m3Template:Bg}}	m3	output unit (abbr)

Tables

The following parameters are intended for use in tables.

Parameter	Description
|disp=table	for a table cell with align="right"
|disp=tablecen	for a table cell with align="center"
|sortable=on	output a numeric hidden sort field for a sortable table

The following shows the wikitext output by some example converts.

Convert	Resulting wikitext
{{convert|47.5|kg|lb}}	47.5 kilograms (105 lb)
{{convert|47.5|kg|lb|disp=table}}	align="right"|47.5 |align="right"|105
{{convert|47.5|kg|lb|disp=tablecen}}	align="center"|47.5 |align="center"|105
{{convert|47.5|kg|lb|sortable=on}}	<span style="display:none">7001475000000000000</span>47.5 kilograms (105 lb)

Fixed table

This wikitext:

{|class="wikitable"
! align=right, rowspan="2" |
!colspan="2"| Length
!colspan="2"| Weight
|- style="vertical-align:bottom;"
!metres !!ft in !!kg !!lb
|-
! Lorem ipsum
| {{convert|28.1|m|ftin|disp=table}}
| {{convert|47.5|kg|lb|disp=table}}
|-
! Dolor sit amet
| {{convert|9.9|m|ftin|disp=table}}
| {{convert|74.1|kg|lb|disp=table}}
|-
! Consectetur
| {{convert|38.2|m|ftin|disp=table}}
| {{convert|31.5|kg|lb|disp=table}}
|-
! Adipisicing elit
| {{convert|18.7|m|ftin|disp=table}}
| {{convert|52.7|kg|lb|disp=table}}
|}

produces this table:

	Length		Weight
	metres	ft in	kg	lb
Lorem ipsum	28.1	92 ft 2 in	47.5	105
Dolor sit amet	9.9	32 ft 6 in	74.1	163
Consectetur	38.2	125 ft 4 in	31.5	69
Adipisicing elit	18.7	61 ft 4 in	52.7	116

Sortable table

This wikitext:

{|class="wikitable sortable"
! align=right, rowspan="2" |
!colspan="2"| Length
!colspan="2"| Weight
|- style="vertical-align:bottom;"
!metres !!ft in !!kg !!lb
|-
! Lorem ipsum
| {{convert|28.1|m|ftin|disp=table|sortable=on}}
| {{convert|47.5|kg|lb|disp=table|sortable=on}}
|-
! Dolor sit amet
| {{convert|9.9|m|ftin|disp=table|sortable=on}}
| {{convert|74.1|kg|lb|disp=table|sortable=on}}
|-
! Consectetur
| {{convert|38.2|m|ftin|disp=table|sortable=on}}
| {{convert|31.5|kg|lb|disp=table|sortable=on}}
|-
! Adipisicing elit
| {{convert|18.7|m|ftin|disp=table|sortable=on}}
| {{convert|52.7|kg|lb|disp=table|sortable=on}}
|}

produces this table:

	Length		Weight
	metres	ft in	kg	lb
Lorem ipsum	28.1	92 ft 2 in	47.5	105
Dolor sit amet	9.9	32 ft 6 in	74.1	163
Consectetur	38.2	125 ft 4 in	31.5	69
Adipisicing elit	18.7	61 ft 4 in	52.7	116

Units in singular or plural

Unit symbols are always singular. Unit names can be singular or plural. A unit is singular when the number is exactly 1:

• {{convert|0.5|ft|m|abbr=off}} → 0.5 feet (0.15 metres)
• {{convert|1|ft|m|abbr=off}} → 1 foot (0.30 metres)
• {{convert|2|ft|m|abbr=off}} → 2 feet (0.61 metres)

Complicated grammar

This example is from article Fort McHenry:

The American defenders had 18-, 24- and 32-pounder (8, 11 and 15 kg) cannons.

This result cannot reasonably be produced by {{convert}}. However, convert can be used to construct the required text.

• Use {{convert}} with subst to insert the required wikitext into the article or your sandbox.

  had {{subst:convert|18|,|24|,|32|lb|kg|0}} cannons

  → had 18, 24, 32 pounds (8, 11, 15 kg) cannons

• When the edit is saved, the convert template is replaced with the result.
• Edit the result to produce the final text.

  → had 18-, 24- and 32-pounder (8, 11 and 15 kg) cannons

An alternative to subst would be to enter {{convert|18|,|24|,|32|lb|kg|0}} into Special:ExpandTemplates, then copy and edit its result into the article.

Limitations

This is a list of features that the module may be expected to support, but which will not work.

Composite units cannot be used in a range:

• {{convert|2|ft|6|in|to|3|ft|9|in}} → 2 feet 6 inches ()

If an expression is wanted, it has to use {{#expr:...}}:

• {{convert|3*12|ft|mm}} → 3×12 feet (910×3,660 mm)
• {{convert|{{#expr:3*12}}|ft|mm}} → 36 feet (11,000 mm)